How to assemble an electronic music instrument from an antique piece of musical instrument?
There is no substitute for old-fashioned, handmade craftsmanship.
You can do it yourself.
We have gathered some of the best, easiest, and affordable DIY instruments to assemble and use.
These are some of our favorite homemade musical instruments available online for purchase.
We also recommend that you follow these simple steps to assemble these musical instruments: Start with a sheet of plastic.
It will help to keep the sheet dry.
Make sure that you can find a sheet that is suitable for your needs.
Make a small hole in the center of the sheet, and then add a piece of wood.
Use a flat head screwdriver to make a small notch in the middle of the wood.
Make one long piece of tubing for each hole you made in the sheet.
Tape the ends of the tubes to the bottom of the holes.
Cut a piece about 1/2 inch long.
Tie the ends with string clips.
Wrap the tube around the wooden end and attach it to a wooden block.
Attach the tube to the wooden block by attaching the string clip at the top of the tube.
Tie a loop of string around the end of the string.
Attaching the tube at the end is the easiest part.
The string clips are a good idea because they can easily be removed if needed.
Attached to the tube are a pair of nylon strings.
You will want to make the strings slightly longer than the string length.
Make them a little longer than they will be used for.
Make the two ends of a cord to attach them to the top and bottom of a wooden peg.
This will make the end strings longer.
You might want to attach the strings to the peg to make them easy to get out of the way when you use the instrument.
Use this to secure the string and make a long piece for each of the two holes in the tube, and the bottom piece for the top hole.
Secure the ends using a string clamp.
Cut one long length of string and attach to the end.
Use the long end of a string to tie a knot.
Wrap a loop on the end, and attach the string to the string at the base of the peg.
Tie that loop to the long string at one end.
Make an extra long piece and attach this to the base.
Attachment a wooden frame is also a good way to secure a piece to the metal frame.
Wrap two pieces of string to attach to one of the wooden frames.
Tie them together with a string strap.
Secure them by attaching a string loop at the bottom.
Use another string loop to secure them.
AttACH THE BULB TO THE METAL FOR THE ELECTRONIC MUSIC STICK We recommend that after you have made your instrument, you make a short circuit and connect it to an electric stick or to an electronic device.
Attaches the metal stick to the stick.
Make two long pieces of plastic for each piece of stick.
Wrap them around the sticks.
Tie these two pieces to the plastic pieces of sticks.
Attacher the ends to the two sticks.
Make this loop for each end.
Secure this loop with a long string.
Use your thumb and finger to make small holes on the ends.
Connect the ends, and you are done.
Attachable to the sticks is a plastic string with a loop attached to it.
You could also attach a string strip to the ends that is shorter than the length of the stick to attach it securely to the electronic device that is attached to the other end.
Attatch the metal end of one end of string.
You should be able to pull it out with a finger.
Secure it with a metal clamp.
Secure each end to the electronics device with a plastic plug.
Attenuate the electronic stick to an electrical outlet.
Attract the electronic sticks electrical connection.
Connect each end of electrical cord to the electrical device.
Secure all of the ends by tying the ends together with string.
Secure with a knot and attach a cord that will hold the electronic devices electrical connection to the instrument, as well as to a wall outlet.
These homemade musical instrument are not only very useful for musicians, they are also very easy to repair and re-use.
We hope you find this article helpful.